Description
differential pressure transmitter PEL 10K
differential pressure transmitter PEL 10K is a specific execution within the Produal product family PEL 10K. This page helps installers, engineers and system integrators to check the correct execution. It contains only data that Produal publishes for this product.
What does this differential pressure transmitter do?
PEL 10K differential pressure transmitter is designed for measuring static pressure, pressure differences and air volume flow in air handling systems. The transmitter compensates the pressure measurement based on the ambient temperature.
It offers eight fixed pressure measuring ranges that can be selected with jumpers and a custom range that can be configured with the ML-SER commissioning tool. PEL 10K differential pressure transmitters are typically used in building automation systems for fan, fan or filter monitoring, pressure or flow monitoring and valve or damper monitoring.
This differential pressure transmitter has one voltage output and one current output. Both outputs are scalable.
Output mode options include linear pressure modes and linear flow modes (volume). Regular automatic zeroing removes drift of the output signal that can occur due to thermal, electronic or mechanical effects.
The influence of process disturbances (for example turbulence) can be reduced by selecting a suitable response time.
In practice, the execution determines which functions and connection options are available. Therefore always compare the product number with the design, specification and control description. This prevents confusion between very similar types within the same family.
differential pressure transmitter PEL 10K: execution and selection
- Modbus: No
- Display: No display
The selected options above come directly from the Produal Configuration. In addition, the technical table may show additional fixed properties. If in doubt, use the current datasheet and user manual as the starting point.
Technical data of PEL 10K
| Supply voltage | 24 Vac/dc, < 2 VA |
|---|---|
| Differential air pressure measuring ranges | ±500 Pa, ±1000 Pa, -2500…0 Pa, 0…200 Pa, 0…1000 Pa, 0…2500 Pa, 0…5000 Pa, 0…10000 Pa, custom |
| Time constant | 2 s or *8 s |
| Zeroing | automatic; regularly eliminates possible zero point deviation |
| Output voltage | 0…10 / 2…10 / 0…5 Vdc, < 2 mA |
| Current output | 4…20 / 0…20 mA, 700 Ω |
| IP Protection class | IP54 |
| Note on IP Protection class | cable downwards |
| Ambient temperature | 0…45 °C |
| Ambient humidity | 0…95 %rH |
| Product dimensions (w x h x d) | 106 x 102 x 46 mm |
| Installation | with screws, external lugs |
| Materials | PC and PBT plastic |
| Modbus | No |
| Display | No display |
Check the values before installation and commissioning. Pay attention to supply voltage, ambient requirements, protection class and any output signals. When a value is missing, this page does not make any assumption about it.
Application in HVAC and building management
A differential pressure transmitter is part of the field layer of a climate installation. However, the correct application depends on the functions and limit values specified by Produal for this execution. Therefore, an engineer first compares the specifications with the control cabinet, wiring and desired measuring or control function.
This execution states a communication protocol in the technical table. Therefore, check addressing, wiring and protocol settings before commissioning.
Also Plan sufficient space for installation and service. Follow the included installation instructions and use the released document versions. This keeps the selected execution traceable during handover and later maintenance.
Would you like to compare alternatives? Then view the related product category. For help with selection, you can also contact Betec Controls.
Frequently asked questions about PEL 10K
What is the PEL 10K?
The PEL 10K is a Produal differential pressure transmitter. The technical table describes the source data for this specific execution.
Which execution do I get with this product?
This page belongs to product number 1131490. Also check the selected options and connection values before ordering.
What should I pay attention to when selecting?
Compare especially supply voltage, measuring range, output, communication, installation and protection class. Use only values that are stated in the technical table or manufacturer documentation.
Can I connect the PEL 10K to a BMS?
This execution states a communication protocol in the technical table. Therefore, check addressing, wiring and protocol settings before commissioning.