Description
Vocht- en temperatuursensor, 2 x 0-10V DC uitgangen, ruimteinstallatie. Voor Het meten van de relatieve vochtigheid van de lucht.
Description CRH-RW-24V
CRH is used for controlling the humidity and temperature of indoor environments.
CRH features a factory-calibrated CMOS humidity and temperature Sensor element with I2C communication and low power consumption. It provides high accuracy and excellent long-term stability. CRH has extremely low power consumption and ensures very low self-heating, a prerequisite for high measurement accuracy of relative humidity.
Installation
CRH is mounted indoors on the wall and is large enough to cover an electrical box.
Install CRH away from direct sunlight and drafts from ventilation, doors, and windows. When mounted on an electrical box or conduit, it must be sealed to prevent drafts that could affect accuracy.
Mount the CRH with vents on the top and bottom to allow air circulation. Place the Sensor at least 10 mm away from a door frame or wall to allow easy access to the cover.
CRH has a cable entry at the back for connection to an electrical box or conduit.
With surface-mounted connection cable, there are spacers on the back of the enclosure creating an approximately 1 mm gap between the wall and the box where the surface wires are routed.
Wires thicker than 1 mm can be routed through the vent. Part of the vent can be removed if a larger hole is needed.