Description
RTKSA-101.010
Room thermostat, -10…40…°C, hysteresis 1.3K, TW, internal setting | RTKSA-101.010
This series of devices is specially designed for use in heating technology in boiler installations or storage tanks, district heating stations, and heat installations, in ventilation technology as supply air monitoring or as a limiter for electric heating registers, and for controlling and monitoring temperatures of pipes and containers. Immersion sleeves, protective coils, and mounting sets are not included in the delivery. The JZ-29 mounting set can be used in combination with immersion sleeves or protective coils. When used as a feed controller (pipe mounting), the JZ-31 mounting set must be used.
Application
Whether for a greenhouse, industry, or warehouse – these thermostats provide optimal temperature control in various areas. The devices have a high switching capacity and can be connected to a cable from 0.75 – 2.5 mm². The push-in terminals also allow easy and simple electrical connection.
These room thermostats are available in 2 variants:
– Temperature controller (external setting)
– Temperature monitor (internal setting)
Other advantages: Accurate measurement of room temperature – Stainless steel, polished temperature coil – Protection rating: IP 54 (higher on request) – Also available as a double thermostat.
Do you have any questions about this product? Then please contact us! You can reach us by phone or Email, or also enjoy using the chat function.
Technical Data
| Number of outputs | 2 |
| Number of control ranges | 1 |
| Output signal | Changeover |
| Operation | Internal setpoint controller |
| Operating voltage | None |
| Width | 85 mm |
| Electrical connection | Plug-in terminals |
| Electronic control | No |
| Explosion protection | No |
| Color | Anthracite (Ral7016), transparent front |
| Sensor element | Capillary tube |
| Function Type (Systems Engineering) | two |
| Device version | Surface-mounted unit |
| Height | 146.8 mm |
| Maximum storage temperature | 80°C |
| Minimum storage temperature | -30°C |
| Maximum humidity (non-condensing) | 95% RH |
| Maximum Sensor temperature | 46°C |
| Maximum switching voltage | 230 V AC 50 / 60 Hz, 230 V DC |
| Maximum switching current | NC: 16 (2.5) A; NO: 6.3 (2.5) A, 0.25 A DC |
| Medium | Air, non-aggressive |
| Minimum switching voltage | 24 V AC / 50 Hz, 24 V DC |
| Minimum switching current | At 24 V (AC/DC) Min. 100 mA |
| Mounting / fastening | Wall mounting |
| Control range, max. | 40°C |
| Control range, Min. | -10°C |
| Heating control function | Yes |
| Cooling control function | Yes |
| Switching differential | 1.3 K |
| Adjustable switching differential | No |
| Switching element | Microswitch |
| Switch contact | Double-throw contact |
| Potential-free switch contact | Yes |
| Type of protection | IP54 |
| Protection class | I |
| Safety and EMC | Compliant with DIN EN 60730 |
| Scale | Degrees Celsius |
| Depth | 57.5 mm |
| Ambient temperature, upper limit | 50°C |
| Internal setting | Yes |
| External setting | No |
| Sensor material | V2A |
